         
|
 |
Arcom
offers a comprehensive range of industrial PC104, embedded PC and
single board computer products. These are supported by a wide
selection of Development Kits for the leading embedded operating
system. The
functionality of the processor boards can be expanded using the
range of PC/104 I/O modules.
|
|
To help you compare the key features of these products and make the best choice for your application, please check out our
Selection Guide.
|
|
|
 PC104 (PC/104) compatible processor boards
|
| |
ZEUS |
The ZEUS board is an
ultra-low power EPIC format single board computer (6.5” x 4,5” or 165mm x 115mm) based on Intel's 520MHz PXA270 XScale RISC
processor. The features include a flat panel graphics controller,
dual 10/100baseT Ethernet, 7 serial ports, dual USB, audio codec,
digital I/O, onboard Flash memory, SDIO, CompactFlash (CF+)
expansion, PC/104 and a wide input DC/DC PSU |
|
VIPER |
The VIPER
board is an ultra-low power PC104 format single board
computer (3.8”
x 3.6” or 96mm x 91mm) based
on Intel's 400MHz PXA255 XScale RISC processor. The features
include a flat panel graphics controller, audio controller,
10/100baseT Ethernet, 5 serial ports, dual USB, digital I/O,
onboard Flash memory and CompactFlash (CF+) expansion |
|
VIPER-Lite |
The
VIPER-Lite board is an ultra-low power single board computer (3.8” x 3.6” or 96mm x 91mm) based on Intel's 200MHz PXA255 XScale RISC processor. The features include a flat panel graphics controller, 10/100baseT Ethernet, 3 serial ports, USB client (device) interface, digital I/O, onboard Flash memory and CompactFlash (CF+) expansion |
|
VULCAN |
The VULCAN board is a low power PC104 format single board computer (3.8” x 3.6” or 96mm x 91mm) based on Intel's 533MHz IXP425 XScale network processor. The features include dual 10/100baseTx Ethernet ports (with hardware accelerated encryption), 4 serial ports, four USB 2.0, digital I/O,
RTC, tamper switch input, onboard Flash memory and CompactFlash (CF+)
expansion |
|
VULCAN-Lite |
The
VULCAN-Lite board is a low power single board computer (3.8” x 3.6” or 96mm x 91mm) based on Intel's 266MHz IXP420 XScale network processor. The features include dual 10/100baseTx Ethernet ports, 2 serial ports, digital I/O,
RTC, onboard Flash memory and CompactFlash (CF+) expansion |
| |
SBC-GX533 |
The SBC-GX533 is a low profile, fan-less, EBX form factor board, based on the AMD Geode GX 533@1.1W processor. It includes all the standard PC interfaces as well as an onboard graphic controller to drive a standard analogue display or a TFT flat panel, dual 10/100baseTx Ethernet, onboard 32Mbyte Flash drive, CompactFlash port, four USB ports, four serial ports and
PC/104-Plus expansion |
| |
GEMINI |
The GEMINI is an EBX
form-factor SBC, bringing Intel's latest Core 2 Duo technology to
the embedded and industrial market. The GEMINI offers almost
unrivalled performance, coupled with the guaranteed longevity of
supply the market demands |
|
APOLLO |
The APOLLO is an EBX format board (5.75” x 8” or 146mm x 203mm) based on Intel Pentium M / Celeron M high performance, low power Centrino laptop technology. The APOLLO uses the 855GME chipset along with CPUs from 600MHz Celeron M to
1.8GHz Pentium M (400MHz FSB) to create powerful fanless embedded PC
systems |
|
OLYMPUS |
The
OLYMPUS is an EBX format board (5.75” x 8” or 146mm x 203mm)
offering a high performance embedded PC for your network enabled
multimedia applications. This board includes support for
Socket370 processor options up to the 1GHz, 133MHz FSB Intel®
Pentium® III processor along with the high performance S3®
Savage4™ 3D graphics accelerator. The board includes a PCI
slot (with riser card support) and PC104 expansion |
| |
PEGASUS |
The
highly integrated PEGASUS PC/104 format embedded PC is powered
by the 133MHz AMD SC520 embedded controller and combines full
10/100baseTx network connectivity with 4 serial ports and
embedded Flash |
|
SBC-GX1 |
The
SBC-GX1 is a low profile, fan-less, multimedia PC-compatible
processor board based on the 300MHz AMD Geode™ microprocessor. This EBX format board includes
10/100baseT Ethernet, 4 serial ports, on board Flash memory and
CompactFlash expansion.
End-of-life. Not recommended for new designs - check for
availability. |
|
AIM104-386EX |
PC/104-compliant
single board computer, based on the 33MHz Intel 386EX embedded
processor, with 4 serial ports and ROM-DOS installed as standard.
End-of-life. Not recommended for new designs - check for
availability. |
|
|
|
Small outline Processor
|
|
MERLIN |
The
MERLIN embedded controller is powered by the 25MHz Intel 386ex
microcontroller and includes 2Mbytes DRAM, 1Mbytes Flash and
512Kbytes of SRAM. It offers three serial channels, 10baseTx
networking and on board (wide input) power supply.
End-of-life. Not recommended for new designs - check for
availability. |
|
|
|
EBX Single Board Computers (SBC)
|
| |
GEMINI |
The GEMINI is an EBX
form-factor SBC, bringing Intel's latest Core 2 Duo technology to
the embedded and industrial market. The GEMINI offers almost
unrivalled performance, coupled with the guaranteed longevity of
supply the market demands |
|
APOLLO |
The APOLLO is an EBX format board (5.75” x 8” or 146mm x 203mm) based on Intel Pentium M / Celeron M high performance, low power Centrino laptop technology. The APOLLO uses the 855GME chipset along with CPUs from 600MHz Celeron M to
1.8GHz Pentium M (400MHz FSB) to create powerful fanless embedded PC
systems |
|
OLYMPUS |
The
OLYMPUS is an EBX format board (5.75” x 8” or 146mm x 203mm)
offering a high performance embedded PC for your network enabled
multimedia applications. This board includes support for
Socket370 processor options up to the 1GHz, 133MHz FSB Intel®
Pentium® III processor along with the high performance S3®
Savage4™ 3D graphics accelerator. The board includes a PCI
slot (with riser card support) and PC104 expansion |
|
SBC-GX533 |
The SBC-GX533 is a low profile, fan-less, EBX form factor board, based on the AMD Geode GX 533@1.1W processor. It includes all the standard PC interfaces as well as an onboard graphic controller to drive a standard analogue display or a TFT flat panel, dual 10/100baseTx Ethernet, onboard 32Mbyte Flash drive, CompactFlash port, four USB ports, four serial ports and
PC/104-Plus expansion |
|
SBC-GX1 |
The
SBC-GX1 is a low profile, fan-less, multimedia PC-compatible
processor board based on the 300MHz National Semiconductor®
Geode™ microprocessor. This EBX format board includes
10/100baseT Ethernet, 4 serial ports, on board Flash memory and
CompactFlash expansion.
End-of-life. Not recommended for new designs - check for
availability. |
|
|
|
PC/104 Modules
|
|
W-E-B
Telemetry |
Mobile wireless
GPRS, GSM, iDEN with GPS - PC/104 compatible baseboard |
|
|
|
|
PRV-1059 |
5-port PC/104
10/100baseTx fast Ethernet switch |
|
AIM104-MOTION-1 |
8-bit
PC/104 module providing single axis stepper / DC servo
motor control with on-board drivers |
|
AIM104-COM4 |
4 Channel RS-232 and isolated
RS-422/RS-485 Asynchronous (16C550) Serial Comms Interface |
|
AIM104-COM8 |
8
Channel RS-232 Asynchronous (16C550) Serial Comms Interface |
|
AIM104-CAN |
Single
Channel Opto-Isolated CAN interface module supporting the Philips
SJA1000 Controller |
|
AIM104-SER4 |
4
Channel RS-232 serial communications (Zilog 85230) Interface |
|
AIM104-RELAY8-IN8 |
8
Changeover Relays and 8 Opto-isolated Inputs |
|
AIM104-IN16 |
16 Opto-isolated Inputs |
|
AIM104-IO32 |
32 TTL
compatible digital I/O |
|
AIM104-MULTI-IO |
Isolated 16 Channel 12-bit
ADC, 2 Channel 12 DAC and 8 Channel digital input |
|
AIM104-RTC |
8-bit
module providing a real time clock with a very high
stability option (30 sec / year) |
|
AIM104-ADC16/IN8 |
Isolated 16 Channel 12 bit
ADC and 8 channel digital input |
|
AIM104-ETHER |
10baseTx
Ethernet Interface Module |
|
AIM104-KEYDISP |
Matrix Keypad and LCD
Interface Module |
|
VIPER-I/O |
General purpose I/O module (inputs, outputs, relays, switches and sounder) for use with the VIPER and
VIPER-Lite products. This is not a PC/104 module. |
|
AIM104-OUT16 |
16 Opto-isolated
Darlington driver outputs |
|
AIM104-PULSE |
16 isolated status/accumulator/frequency
inputs |
|
AIM104-VGA-CRT |
Super-VGA CRT Graphics
Module |
|
AIM104-VGA-LCD-3 |
Super-VGA Flat Panel and
CRT Display Module |
|
|
|
PCI-bus
|
|
APCI-ADADIO |
Provides 8 differential
(APCI-ADADIOCD) or 16 single-ended (APCI-ADADIOCS) multiplexed analogue inputs, two
analogue outputs, 16 digital I/O lines and three counter/timer channels |
|
APCI-RELAY8/IN8 |
Features eight
opto-isolated inputs with 1500V input-to-output isolation, together with 8 changeover
relay outputs rated to a maximum of 60 Watts |
|
APCI-IB40 |
Offers 40 bi-directional,
bit-configurable I/O channels, providing a suitable interface option for higher channel
count requirements |
|
APCI-SER4 |
Provides 4 channels of
RS232/485 serial communications. The module is designed using the popular 85230 enhanced
serial communications controller. Each channel is capable of providing either RS232, RS485
or RS422 serial communications |
|
|
FREE
Windows NT 4.0 PCI-bus
drivers (version 1.8) |
|
|
|
|
|
|
|
|
|
|
