| Specification |
|
Processing
Unit |
- 312
or 520MHz PXA270 processor
- 64MB SDRAM
- 256kB CPU SRAM
- 32MB soldered Flash (64MB option)
- Battery backed RTC (off-board battery)
- Watchdog timer |
|
Drive Support |
- IDE interface (for 3.3V devices
only eg. DOM/QUANTUM Ethernet module) not compatible with
conventional hard drives
- MMC/SD/SDIO interface
- CF Interface bus |
|
Graphics and Audio |
- Video
controller supporting STN & TFT displays up to 640x480
- 4 wire analogue resistive touchscreen
support
- AC97 compatible CODEC with line-in,
line-out & mic |
|
Communications & IO |
- 3 x
standard serial ports (TTL)
- 2 x high speed serial ports (TTL, automatic RS485 half-duplex
direction control output via RTS#)
- 2 x SSP (synchronous serial protocol) ports (eg. for SPI support)
- Up to 78-bit GPIO (depends on what interface used)
- 1 x USB 1.1 host port
- 1 x USB 1.1 host/client port
- I²C bus
- 2 x PWM outputs |
|
Other Features |
JTAG
debug and test interface |
| Power
& Environmental |
3.3Vdc, 0.5A typical
Operating Temperature -20 to +70°C (-40 to +85 option)
SO-DIMM factor (67.6 x 50mm) |
